Urgo Algoplaque HP

Packing: 16pcs / box

Size: 10cm x 10cm

Algoplaque Hydrocolloid dressing

• Provides a moist environment
• Waterproof and bacteriaproof
• Transparent for better wound monitoring

Algoplaque is a sterile semi-permeable, hydrocolloid dressing:

• The inner layer is composed of hydrocolloid particles (carboxymethylcellulose) incorporated in an elastomer mesh.
• The outer layer is a semi-permeable polyurethane backing.

When in contact with the wound, the hydrocolloid particles absorb exudate gradually, forming a moist gel and creating the optimal conditions for the healing process in terms of moisture, temperature and pH.

This gel is non-adherent, which allows the dressing to be removed without damaging the wound.

INSTRUCTIONS FOR USE

1. Clean the wound as per local protocol and rinse with normal saline.
2. If an antiseptic is first used, rinse the wound thoroughly with saline solution before applying Algoplaque.
3. Dry the surrounding skin carefully with a sterile compress.
4. Ensure the size of Algoplaque chosen is large enough to leave 2 to 3 cm of the dressing overlapping the healthy skin around the wound.
5. Remove the protective films and apply Algoplaque to the wound without any tension, making sure not to touch the part with the fingers.
6. Smooth the dressing gently over the wound and more firmly around the edges covering surrounding skin.
7. For Algoplaque Sacrum, apply the dressing with the point down towards the natal (gluteal) cleft. To ensure good adhesion and protection, in case of incontinence, apply as flat as possible.

Algoplaque should be changed every 3 to 4 days on average, on an uninfected wound, dependent on exudate level, then replace with Algoplaque Thin (changed every 4 to 6 days) when the wound is at the epithelialisation stage.

To remove Algoplaque, stretch the dressing by pulling each side and it will lift slowly and gently from the wound (tangential removal).